conaero's latest activity

Welcome to the Italian way!

From the drawing 2 is non Skhook and 3 is skyhook. The easiest way to check is open the bonnet, remove the cover and look for a wire...

Or there is too much gas in it. The book says 1100gm and it should be 600gm

I have seen it lots and it’s not plugged in so I wouldn’t worry about it.

Yes that’s the vertical acceleration sensor, just buy the right one for your model, take yours out and get the number off it.

Then you get a wheel bearing fail out the blue and that’s £1200 Inc vat out the window. Work on £3k pa but you may well end up spending...

^ Yep, clean it off, bend the contacts a little, done it on many 3200/4200 and Alfa GTV’s (same unit)

The intake rubber bit are failing and splitting so that’s the first place to test. If you have an intake/plenum leak sparky brake and...

The Best way to test the cooling system is to pressure test it and see if it drops and where the leak is. Any Good workshop should be...

Hotels now booked and ferries sorted

It’s usually the thermostat housing O ring. Take the air filter box out completely to do it and a smear of sealer is advisable.

I sold one to Steph/Ebenezer a few weeks back, he’s not that far from you. You can test it

Well you can poke the electric bit of it. Old tech now

Parked up in Chelsea this evening

Is this the Giulietta replacement. I like it. Done well with a boring mini SUV with the Alfa styling touches. If it keeps Alfa in...