GT Rear Shelf REMOVAL

conaero

Forum Owner
Messages
34,644
This is a series of 'how to guides' for the complete removal of the rear interior trim:

THE PANELS MUST BE REMOVED IN THIS ORDER:


TOOLS REQUIRED

01.jpg

  • 13mm Socket
  • 4 & 6mm Hex Bits
  • Cross Head Screwdriver
  • Trim Panel Stud Release Tool
  • Flat Head Screwdriver
  • Palet Knife


REAR SHELF REMOVAL

Start by removing the 4 Hex head fixings.

13.jpg

14.jpg

Next pop open the upper lids on both sides and remove the 13mm socket fixings.

15.jpg

The shelf will now be able to pulled upwards allowing you to disconnect the 2 speaker multiplugs. You must pull the green locking pins first.

16.jpg

17.jpg

You can now pull the shelf forward to release it from its rear fixings.

18.jpg

19.jpg

20.jpg

REFIT IS THE REVERSE OF THE REMOVAL PROCESS