JAGPURR
New Member
- Messages
- 91
REAR SEAT SQUAB REMOVAL
Just for Conaero.
You can pull and push till doomsday and not get the squab catches to disengage.
You need one of these pry bars £3.69 from your local Screw-Fix or £5 from B&Q
Feel along the squab bottom and about 4 inches ( 100mm) in you will feel the edge of the catch. Put some rag over the bar and push in as close to the side of the catch as possible'
Pull up at the end of the bar and it will pop out a treat'
This is what the catch looks like out. It pushes back in a lot easier.
Jagpurr
Just for Conaero.
You can pull and push till doomsday and not get the squab catches to disengage.
You need one of these pry bars £3.69 from your local Screw-Fix or £5 from B&Q
Feel along the squab bottom and about 4 inches ( 100mm) in you will feel the edge of the catch. Put some rag over the bar and push in as close to the side of the catch as possible'
Pull up at the end of the bar and it will pop out a treat'
This is what the catch looks like out. It pushes back in a lot easier.
Jagpurr