Rechromed or Stainless Wheel nut set 4200 and maybe Gransport

[Fat Arnie]

SOLD - Rechromed or Stainless Wheel nut set 4200 and maybe Gransport

As shown. Shiny, no rust but they have been used.



£80 for set of 20

SOLD

 

[CatmanV2]

Standard length?

C

 

[Fat Arnie]

Good question. How long is std length? I think they are std size for Asseto Corsa/4200 wheels.

 

[CatmanV2]

Dunno. I could undo one of mine and subtract 15mm, at the weekend.

C

 

[allandwf]

I have length and torque settings written on garage wall, will check in the morning.

 

[StuartW]

I have length and torque settings written on garage wall, will check in the morning.

Very practical graffiti!

 

[davy83]

Are these stainless? what grade of stainless? Stainless steels generally have lower yield strengths than carbon steel alloys which is why i went for chroming on my own car, was not sure the bolts would be the same strength as the original design, cars scary enough without the wheels going for a wander.

 

[allandwf]

32mm for AC wheel bolts, assume 4200s are the same length?

 

[Fat Arnie]

OK I've now confirmed these are ferrous steel (so not stainless) and are chromed. They are aslo 62mm long overall, or 32mm from the base of the taper. So they are for stock Gransport, 4200 or 3200 AC wheels. They are not suitable for a 3200GT on std wheels.

 

[conaero]

You can get a new set of stainless from Sprogs for £140, think £100 is a bit rich.

 

[Fat Arnie]

Price reduced to £80 based on Matt's input.