Results 1 to 5 of 5

Thread: QP 4.7s Purge Valve and how to replace

  1. #1
    Member Razz's Avatar
    Join Date
    Apr 2017
    Location
    Watford
    Posts
    64
    Good evening all

    I have had this annoying ticking sound on my QP since I bought it and is getting progressively louder, more so once the engine has warmed up.

    It has been seen by HR Owen and diagnosed the Fuel Purge Valve solenoid that needs replacing - nothing major.

    Would someone be kind enough to point me to a) The part number and b) is it an easy DIY job.

    I did look on Eurospares but couldn't quite work out which bit!

    Best
    Razz

  2. #2
    SportsMaserati.com Moderator Contigo's Avatar
    Join Date
    Dec 2010
    Location
    Newbury
    Posts
    16061
    Voicey is your man, never heard of that issue.

  3. #3
    Senior Member D Walker's Avatar
    Join Date
    Oct 2014
    Location
    Thirsk, North Yorkshire
    Posts
    6104

  4. #4
    Senior Member voicey's Avatar
    Join Date
    Apr 2011
    Location
    London and Kent
    Posts
    623
    Your best best is to speak to HR Owen but I suspect they mean a valve in the fuel vapour system. I believe that the valve linked above is a part fitted only to Federal cars.

  5. #5
    Member Razz's Avatar
    Join Date
    Apr 2017
    Location
    Watford
    Posts
    64
    Hi Voicey

    You are spot on - the valve that HR Owen identified runs from the fuel vapour (recirculation) lines back over the RHS and is clamped somewhere aft of the shock absorber - where it is clamped it sends a loud annoying tick which can be felt and heard quite a bit.

    Many thanks
    Razz

    ps sent you a pm on a separate note

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •