Search results

Hi Guys, I just got a set of coilovers installed on my 3200. Obviously with the coilovers the adjustable stiffness on the Sport button is redundant. I was wondering if anyone would know how to trick the system into thinking that the actuators are still installed and thus eliminating the...

Well I went and had a closer look at my throttlebody and it turns out that the previous owner got the Xemodex guys to rebuilt the throttlebody, so I guess I just wasted $130. Oh well, back to the drawing board to find why the 3200 is idling/revving by itself.

I just ordered this from ebay. http://www.ebay.com/itm/131230246655?item=131230246655&viewitem=&vxp=mtr Thinking that i will give it a go myself. I will let you know the results once I have done it.

Hey Ross, around what time are you planning on going to this?

The exhaust on the 3200 is 3", I don't know for the 4200. From memory the valves cost around $700 AUD. here is the one I got: http://shop.quicktimeperformance.com/cart.php?m=product_detail&p=107

The bypass valves are from a company called QTP and they are electric, so i can open and shut them from a switch i have under the steering wheel. Also with the valves open it directly bypasses the backboxes, with it closed then have nice and quiet backboxes. I only had the middle cat removed...

Here you go some pictures and a video of it in action. http://youtu.be/Wdrs8Vzw63g?list=UU8pquyp0i8Je_tktQ-AcgsQ

I'll post a video later today. I have the 3200 with decat, H pipe and bypass valve and just replaced the pop-off's with a pair of GFB BOV's.

Sump plug is 17mm allen key. i got one of these sets.

i did the oil change on my 3200 yesterday, and the hex is a 17mm. It's a pain in the **** to get the oil filter out. You need to undo it, then disconnect the right hand air intake from the throttle body so that you have enough room to lift the oil filter out from the top. That's the only way I...

Nice day for a little cruise for coffee. Hopefully next time we can get a few more cars.

Thanks Conaero, that's what I meant by the inlet manifold gasket but I didn't know what that one was called. I did speak to the mechanic that this car has previously been serviced at and he said that they have replaced that gasket just before I bought the car. When I'm driving the car hard it...

No problem with the timing belt, just don't know when it was changed and car has done just over 100 000 kms. The vacuum leak is another story. I not 100% sure, but it sounds like either the inlet manifold gasket or one of the lines under the inlet manifold. The idle is quiet high (around 1100...

Hi Guys, anyone who lives in Perth can recommend a Mechanic to work on my 3200GT. So far I have been in contact with Euro Motor Repairs, but been very slow with quoting for the work I after. I need to get the timing belt done and maybe some vacuum leak checked. Cheers Justin

Thanks Mate, Yup i have a 3200gt. Love the car. Yours a 3200gt as well?

Here's a flyby of my car on the track. exhaust is decated, H-pipe and has QTP bypass valves and obviously this is with the valves open. Gotta love the no muffler sound. http://youtu.be/FCrReWiDOUk

turning some heads at a JDM cruze.. woops a little side ways.

Hey Mate, yes i have signed up. But unfortunately I have had a last minute work trip to Singapore and am now going miss out. Oh well next time. Though on the up side, probably going to be able to check out the F1 this weekend.

Here you go, me driving ******* a skidpan. Gives you a bit of an idea what the system sounds like. http://www.youtube.com/watch?v=UfdGXhVOSnA

Hey Mate, I got the work done at Custom Exhaust Specialists, on Collingwood Street, Osbourne Park. They did a really good job of it.