4200 X-Pipe fitment

[Matt82]

Morning all,

Just thought I would tap into the experience on here, with a quick question reference swapping out the standard silenced x pipe for one of Benny’s.

What’s the best route to remove the x pipe section? Take off back boxes and then the link pipes to get to it or unbolt the Cat section and remove ‘frontwards’?

Thanks
Matt

 

[2b1ask1]

Put masking tape around the bumper openings of each tail pipe, all the way in. Then with the car adequately lifted, split the Joints in front of the back boxes (need to remove the brace bar first) then the link sections then the resonator/X-pipe. Reverse to build up.

 

[Matt82]

Put masking tape around the bumper openings of each tail pipe, all the way in. Then with the car adequately lifted, split the Joints in front of the back boxes (need to remove the brace bar first) then the link sections then the resonator/X-pipe. Reverse to build up.

Top stuff, thanks. I’ll start from the back

 

[Gazcw]

Yep I wrapped my tail pipes with some towels to protect the bumper but same process.

 

[Matt82]

Thanks gents
All out, ready for reassembly tomorrow. Had to use my favourite quilt cover as a mat