I had my battery die on my granturismo sport 2014 and had it started with a jump pack then took it and had a new battery but after starting it the alarm won’t make the beep sound and the indicators don’t flash after getting it going or after replacing the battery! Is there a way to reset this? I was told it would be related to the battery but now have a new one and still happening, can’t find a setting or way to get it back to how it was but was fine before the battery died. Any help would be appreciated
Alarm not making a sound or indicators flashing after dead battery
- Thread starter dawsonian
- Start date
safrane
Member
- Messages
- 16,822
Quite a common occurrence on the GT/QP.
Do a search on here and you will find similar posts.
Do a search on here and you will find similar posts.
I have seen similar posts but no real solution to the issue for some strange reason, have tried a few things like lock and unlock manually, hold down the fob buttons and nothing has worked yet. Do you know of a rest procedure to put it back to how it was? Or is it a case of taking it to the dealer to plug in? Thanks
conaero
Forum Owner
- Messages
- 34,625
I replied on FB…sorry Meta
The alarm battery has gone flat and will take a few days to charge up.
then on the remote phone do reset:
if that doesn’t fix it you need to replace the alarm unit at about £100 in the front wing by removing the arch liner
The alarm battery has gone flat and will take a few days to charge up.
then on the remote phone do reset:
- Lock
- Unlock
- Press and hold boot button
if that doesn’t fix it you need to replace the alarm unit at about £100 in the front wing by removing the arch liner