Carbon on a Ghibli

CatmanV2

CatmanV2

Member
Messages
48,727
P10GE said:
That is very easy! I did the door trims last night and it took about half an hour to do from removal to replace.

The Center console is also simple... a bit more intricate to wrap but again it took about half an hour to complete.

The parts need to be off to wrap around them for a good finish.
Click to expand...

I've just looked at the manual for the removal of the centre console. Now I know the factory way may not be the only way but when it start with 'remove front seats' and continues with 'remove rear seats' I think I'll pass :D

C
 
P10GE

P10GE

New Member
Messages
22
CatmanV2 said:
I've just looked at the manual for the removal of the centre console. Now I know the factory way may not be the only way but when it start with 'remove front seats' and continues with 'remove rear seats' I think I'll pass :D

C
Click to expand...

They have it very wrong that’s why the dealers make so much money!

Simply remove the cap on the shifter, take out the bolt with a 3mm alan key and lift it off... put a trim removal tool under the edge of the trim and prise it up.... disconnect the cables and your done. Five minutes max!
 
CatmanV2

CatmanV2

Member
Messages
48,727
P10GE said:
They have it very wrong that’s why the dealers make so much money!

Simply remove the cap on the shifter, take out the bolt with a 3mm alan key and lift it off... put a trim removal tool under the edge of the trim and prise it up.... disconnect the cables and your done. Five minutes max!
Click to expand...

Yeah, you are aware we drive different cars, yes? ;)

C
 
Navcorr

Navcorr

Member
Messages
3,839
CatmanV2 said:
No worries, otherwise I'd be in like Flynn!

C
Click to expand...

Maybe of interest:
Google "spec.dock Bentley Continental GT v2 Installation Instructions"

The .pdf guide doesn't appear to involve seat removal. Trim removal looks simple enough - then they are wanting to sell something so I suppose it would do.
 
You must log in or register to reply here.