EasyMAS Diagnostic Release

Steve4200

Member
Messages
195
1. EasyMAS PDF Reports are stored in the desktop folder named "EasyMAS Workshop" There are then sub folders for each ECU Report, so in this case under "NQS Reports" is for the for cluster.

2. Update version 1.0.8 available very soon which addresses the QP module selection including some minor fixes and improvements.

Service History PDF Report example :-

View attachment 85301

Work in progress >>>
M139 / M145 Parking Sensor System
M139 / M145 Tyre Pressure Monitoring System
M138 Airbag
M138 ABS

Regards

EasyMAS Version 1.0.8 released.
Addresses the QP module selection including some minor fixes and improvements.

EasyMAS owners can download the latest version via their account.

Regards
 

Steve4200

Member
Messages
195
Can the system enable sports setting on a GS but without the stiff suspension?

That is a factory vehicle configuration setting, it would need a new Proxi file from the manufacturer but would have to be a standard option for them ? If such a file is obtained then it’s needs to be uploaded to the body computer. EasyMAS does not currently have that option.

Regards
 

skyestuart

Member
Messages
181
I realise the EASYMAS system wont work on my 3200GT, what diagnostic system will do ? is it the Ferrari system, where could I buy one and what is the price ?
 

safrane

Member
Messages
16,748
That is a factory vehicle configuration setting, it would need a new Proxi file from the manufacturer but would have to be a standard option for them ? If such a file is obtained then it’s needs to be uploaded to the body computer. EasyMAS does not currently have that option.

Regards
Thank you... sadly it was not a factory option either... more visits to dentist then!
 

Steve4200

Member
Messages
195
EasyMAS Version 1.0.9 released.

Added Indication of Active Fault Codes.
Corrected some Fault Code Texts.

Pricing Reduction for 2023.

EasyMAS owners can download the latest version via their account.

Regards
 
  • Like
Reactions: Zep

Steve4200

Member
Messages
195
Just ready to release a new EasyMAS version with F1 Clutch and Actuator Bleed routines.

Just a question on a few actuator mysteries, or at least not very well documented.

1. The 3 actuator bleed screws would appear to open internal fluid bypasses and do not allow fluid to exit the bleed screw like clutch bleeding?

2. The actuator has a low pressure fluid return line. Is this for internal leakage or the fluid return for actuator bleeding?


Regards
 
Last edited:

Steve4200

Member
Messages
195
Just ready to release a new EasyMAS version with F1 Clutch and Actuator Bleed routines.

Just a question on a few actuator mysteries, or at least not very well documented.

1. The 3 actuator bleed screws would appear to open internal fluid bypasses and do not allow fluid to exit the bleed screw like clutch bleeding?

2. The actuator has a low pressure fluid return line. Is this for internal leakage or the fluid return for actuator bleeding?


Regards
Think I have answered my own question. If fluid is seen in the actuator low pressure return line the bleed screws are loose or the actuator seals are passing.

Regards
 

Steve4200

Member
Messages
195
EasyMAS Version 1.1.0 and 1.1.1 released.
These had minor fixes and improvements.


EasyMAS owners can download the latest version via their account.


Regards
 
Last edited:

Steve4200

Member
Messages
195
EasyMAS Version 1.1.2 released :-

The Bluetooth Read/Write system -
F1 Clutch Bleeding.
F1 Gearbox Actuator Bleeding.

EasyMAS owners can download the latest version via their account.

Note :-
The USB Read only system will be retired when stocks are exhausted.
We have 2 left in stock.
The reason is firmware capability as the USB system units cannot communicate with the M138 Airbag and early M138 ABS etc.
The USB Read only system will work the same as the Bluetooth Read only system for all the other EasyMAS supported ECU’s.
Software for the USB Read only system with still have updates within its capability.

Regards
 
Last edited:

Steve4200

Member
Messages
195
EasyMAS Version 1.1.2 released :-

The Bluetooth Read/Write system -
F1 Clutch Bleeding.
F1 Gearbox Actuator Bleeding.

EasyMAS owners can download the latest version via their account.

Note :-
The USB Read only system will be retired when stocks are exhausted.
We have 2 left in stock.
The reason is firmware capability as the USB system units cannot communicate with the M138 Airbag and early M138 ABS etc.
The USB Read only system will work the same as the Bluetooth Read only system for all the other EasyMAS supported ECU’s.
Software for the USB Read only system with still have updates within its capability.

Regards
EDIT :-
We have removed the M138 Airbag support for this release. Issue with hardware connection for M138 Airbag, aiming to resolve next release.

Regards