Ford GT detailed

JayOne

New Member
Messages
92
First up was to give the engine bay a good clean, this was done with AG Powermax 3
P1120803.jpg


P1120804.jpg


P1120806.jpg


P1120807.jpg


P1120814.jpg


P1120825.jpg


P1120817.jpg


Once engine bay was complete I turned my attention to the body work, with the car getting heavy track use it was covered in heavy tar and rubber so vehile was foamed twice before washing.
P1120826.jpg


P1120827.jpg


P1120837.jpg


As the car is used on the track their was a build up of tar and rubber found throughout the exterior of the car so before claying I went around and removed the bulk of this tar using AS Tardis
P1120842.jpg


P1120844.jpg


P1120839.jpg


P1120845.jpg


P1120866.jpg


P1120867.jpg


Wheels were removed to fully clean the inners and remove the build up of tar and rubber. Once wheels were clean they were protected with Blackfire All Metal Sealant and tyres were treated with Zaino Z16

Arches were also given a good clean whilst the wheels were off
P1120846.jpg


P1120855.jpg


P1120853.jpg


P1120849.jpg


P1120848.jpg


P1120861.jpg


P1120862.jpg


P1120864.jpg


P1120865.jpg


With the car clean and dry the paint work was then inspected and paint levels taken. General swirling was evident along with micro marring from a DA sanding disc .

Correction was carried out using Menz 203s on a polishing pad, some of the heavier sanding marks required Menz 3.02 to fully remove.
P1120868.jpg


P1120869.jpg


P1120871.jpg


P1120872.jpg


P1120874.jpg


P1120875.jpg


P1120876.jpg


P1120877.jpg


P1120884.jpg


P1120886.jpg


P1120888.jpg


P1120889.jpg


P1120893.jpg


P1120894.jpg


P1120899.jpg


P1120900.jpg


P1120922.jpg


P1120923.jpg


P1120930.jpg


P1120931.jpg


P1120937.jpg


P1120938.jpg


P1120942.jpg


P1120943.jpg


The black strips were vinyl so a gentle approach was taken to improve the swirling = menz 85rd and low RPM's which gave some great results
P1120925.jpg


P1120927.jpg


After correction was complete a light finishing polish was then used to burnish the paint to a perfect gloss.
P1120970.jpg


P1130077.jpg


P1130085.jpg


P1130078.jpg


P1130087.jpg


P1130086.jpg


Glass polished with Jeffs Strong
P1130141.jpg


For protection Blackfire ALL Finish Paint Protection was used, this applied by PC on a LC Gold finishing pad.
P1120972.jpg


Diffuser and trim throughly cleaned and treated
P1120974.jpg


P1130109.jpg


P1120975.jpg


Exhausts were heavily tarnished so a assortment of metal polishes were used. These were then protected with Blackfire Metal sealant.

Right side done
P1120985.jpg


Vents cleaned and protected
P1120976.jpg


Engine bay sealed with Swissvax MotorShine
P1120979.jpg


P1120980.jpg


A few finished shots
P1130006.jpg


P1130040.jpg


P1130130.jpg


P1130131.jpg


123.jpg


P1130002.jpg


P1130059.jpg


P1130014.jpg


12345678.jpg


12345.jpg


Thanks for looking