GS dash vs 4200

BennyD

Sea Urchin Pate
Messages
14,994
Unfortunately, to do that, you have to experience being in the car with MAF and, personally, I would rather dangle my d!ck in hot chip fat. ;)
 

MAF260

Member
Messages
7,662
Unfortunately, to do that, you have to experience being in the car with MAF and, personally, I would rather dangle my d!ck in hot chip fat. ;)

Stop flirting with me. I've told you on many occasions that I'm not interested in your 'advances'!
 

Contigo

Sponsor
Messages
18,376
After following it for most of the Le Mans trip I hope to never get behind it again! It is wearing!
 

mjheathcote

Centenary Club
Messages
9,033
I like my 4200 dash, don't consider the GS dash an upgrade at all.
Did a 100 mile Rally for charity on Sunday, and found the trip and nav very useful, infact essential! My navigator could reset the trip computer after ever turn, then flip to the nav screen which displayed on the bottom what road name we where on.
We got back first after 3 hours, even though we where in the middle of the 40 cars doing it.
At the start we where actually following a very nice 3200, don't know if he is on here was hoping to see him at the end. Unfortunately he missed a turn infront of us, then we heard he broke down and had to be recovered home.
 

mjheathcote

Centenary Club
Messages
9,033
Well clearly not running it enough then...

Apparently starter motor issue.
I don't think he has had it long, the very brief conversation before we left at the start of the rally was that he had just changed the throttle body for a contactless one.
 

Navcorr

Member
Messages
3,839
It was almost certainly their hub based system using equipment from 10+ years ago. Decent enough at the time given the alternatives of the day. Have a look at Sablewolf's recent thread instead.
 

Twinspark

Member
Messages
460
Somebody's also done it on YouTube, still active evidently so he might be able to set you up with a bezel or other useful things:

Not sure where he put the hazard switch though.
 

Sanmiam

New Member
Messages
6
Hello, do you have the reference of this replacement by kenwood ? Thanks in advance

Files for the bezel can be found from a link on that pg. You can have it printed anywhere where 3D printing is available, and instructions for relocation of the hazard and HVAC light triggers are on that pg as well.

I would recommend that you find a large format printer that will combine the two pieces files into 1. It took a good bit of filling and sanding on my bezel to get it right - having it printed in 1 piece up front would have eliminated that.

Also, find a standard double dinn sized radio. I modified to fit a toyota/subaru size unit and it was a pain.