lines identification required

blangs

New Member
Messages
5
Gents,

There are three lines that run parralell to the underside sill passenger side on the 3200. All three of which have some small level of corrosion. Haven't been able to chase the lines back as the weather hasn't afforded itself yet. Two of which are the same size the other is slightly larger in diameter. Can anyone clarify what lines these are. There are lines also on the drivers side and when ordering I don't want to get these mixed up.

Regards
 

Sniffer

New Member
Messages
37
The two smaller ones are the brake lines. The one nearest the prop is right rear caliper, and the other feeds the left rear caliper.

The other larger pipe is not fuel, as the fuel lines run on the drivers side RHD and there is both a supply and return.

Is the third possibly the handbrake cable?
 

blangs

New Member
Messages
5
doesnt reassemble the handbrake cable from the schematic though you are possibly right. you can see three pipe lines being held by a bracket in the schematic below within the blown up detailed drawing
004_067.gif
 

lozcb

Member
Messages
12,586
doesnt reassemble the handbrake cable from the schematic though you are possibly right. you can see three pipe lines being held by a bracket in the schematic below within the blown up detailed drawing
004_067.gif


Be worth a quick call to either Roberto at Grimaldi engineering or Myles of Emblem sports to clarify whats what


regards loz
 

Sniffer

New Member
Messages
37
Yes, looking at the drawing, the handbrake would not have a bend with that kind of radius.