Pistons Maserati

F136

New Member
Messages
9
Does anybody know what this piston Maserati is from ?
 

Attachments

  • thumbnail_IMG_20191111_214448.jpg
    thumbnail_IMG_20191111_214448.jpg
    271.4 KB · Views: 24
  • thumbnail_IMG_20191111_214514.jpg
    thumbnail_IMG_20191111_214514.jpg
    226.3 KB · Views: 26
  • thumbnail_IMG_20191111_214525.jpg
    thumbnail_IMG_20191111_214525.jpg
    288.8 KB · Views: 25
  • thumbnail_IMG_20191111_214552.jpg
    thumbnail_IMG_20191111_214552.jpg
    243.9 KB · Views: 25

Oneball

Member
Messages
11,069
It’s a modern piston with 4 valves and based on the dome not out of a turbo so I’d guess QPV, 4200 or GT
 

F136

New Member
Messages
9
Cylinder bore is 94mm, it means these pistons are from some 4,7 Maserati. I need them for my racing engine Ferrari 430. I can not order them from Maserati because I don´t know the exact item number and dealer Maserati doesn´t know it...
Absolutly the same pistons I have seen with three rings. Help me with this order number,please.
 

Attachments

  • IMG_0036.JPG
    IMG_0036.JPG
    254.7 KB · Views: 19
  • IMG_0037.JPG
    IMG_0037.JPG
    204.2 KB · Views: 16

Zep

Moderator
Messages
9,110
It seems there are a few options, all of them will be from a Granturismo.
 

Attachments

  • 6BE7DE34-BB42-4EDE-BDA5-10D528ECC6E5.png
    6BE7DE34-BB42-4EDE-BDA5-10D528ECC6E5.png
    1.8 MB · Views: 10
  • 228B25A9-ABFC-4CFB-A666-EFECE4513C49.png
    228B25A9-ABFC-4CFB-A666-EFECE4513C49.png
    940.8 KB · Views: 10

F136

New Member
Messages
9
Yes, I know these diagrams, but there is maybe 4 or 5 options. Also I have found some pistons from Maserati GT 4,7 on ebay but I didn´t
find this shape as pictured.
 

Zep

Moderator
Messages
9,110
I hope you find them. It’s fairly unlikely that anyone here will have rebuilt an engine, much less replaced the pistons and then needed the ones you are looking for, but hope springs eternal!
 

F136

New Member
Messages
9
Thanks for photos, your diametr is 92mm if this engine is 4,2. I need dia. 94mm. Also your piston is for lower compression ratio.
I need the compress. ratio arround 12 - 13.
Thank you.
 

Oneball

Member
Messages
11,069
I’d be surprised if there’s a Maserati that runs a compression ratio of 13:1.

Also the piston in your photo only has two rings which isn’t common in a road car.

Are you positive it’s from a Maserati?