Hi, as I understand it, you have a 4200 and you are trying to bleed the clutch lines, correct?
You will need 1L CS Speed fluid.
- Remove the reservoir cap and have someone fill it while you undo the nut on the bottom of the clutch bell housing.
- As I assume you do not have Diagnosi or such scan tool, you can open and close the drivers door to trigger the pump.
- Repeat several times until the fluid runs consistently with no spitting and do the drain nut up before the pump stops priming
- Top up the reservoir and refit the cap
Take if for a drive and repeat if necessary.
If you are doing this on a GranTurismo MC Shift then the process is the same but you need to use Shell Spirax SF ATF HDX