4200/GS rear spoilers in glass fibre and carbon fibre

[conaero]

Updated list:

Carbon Fibre rear spoiler €250:
Conaero (with screws)
Moz1000 (with screws)
Rotorheadcase (with screws)
Mjheathcote (with screws)

Fibreglass rear spoiler €190:

 

[mjheathcote]

So we need one more to make 5....roll up roll up everyone jump off that fence!

 

[safrane]

Any news on the side skirts yet?

May consider a boot lip but concerned re the holes... will double sided tape hold it in place?...the flat surface parts do look limited in surface-area to get a good hold.

 

[mjheathcote]

Wouldn't trust double sided tape.
Silkaflex or Tigerseal would hold it in place...but if you wanted to remove it the spoiler would be destroyed in the progress, and, quite possibly, the paint would most likely be damaged in the progress for it would have to be peeled off!
Personally I think the boot lip spoiler adds that little extra sporty detail, not in your face, nice and subtle, especially in carbon fibre.
Jump off that fence!!

 

[ahvlanico]

Helo safrane ! you know its the name of a french car!
I must confess I did not yet talked about the skirt to my specialist...do we need carbon fiber or fiberglass ?
I can not do anything without an OE part for a model.

I will finish to put my hood spoiler on my car in a few days will make you nice pics outside.
bye
Nico

 

[safrane]

Salut ahvlanico,

Oui j'avais un En argent qui m'a parlé la chaque fois nous avons fait une promenade en voiture ... voulait toujours une version de bi-turbo... J'ai même appelé mon chien comme la voiture.

Ayez un amour de tout le français de choses, ma dernière petite amie était d'Angers.

Continuez-moi daté sur les jupes

 

[ahvlanico]

Yes the biturbo was a famous car ! my dream is a R5 turbo2..
I went a few times in UK and last year near London at wormley to visit my friends of Quicksilver exhausts ..and 2 days in London, I love Uk I feel well there, better than in Paris..
I knew you where fan of lotus and jaguar but never imagined a so important maserati addicts forum !

 

[R8NAN]

Can I put my name down for a Carbon fibre one

 

[mjheathcote]

That's 5!

 

[conaero]

Ok, I think it's best if the forum holds the money on this one.

Are you ok for us to to place the deposit via Paypal?

Updated list:

Carbon Fibre rear spoiler €250:
Conaero (with screws)
Moz1000 (with screws)
Rotorheadcase (with screws)
Mjheathcote (with screws)
R8NAN (with screws)

 

[ahvlanico]

Hello !
Now we are 5 to want one I can talk to the men who make the spoilers.
This men is too rebuilding an old ferrari and is always running, missing of time.
I will tell him we are ready to order to know the delay. You will have to be patient, it could be a bit long. Longer than if you would order on an online shop but you will pay 1/4 of the price you would..

So what I suggest this agreement:

I ask the question for the delay.

When we know, you confirm or not your order.

If confirmed you send me a deposit of 30 euros. This deposit is refunded if I m not able to give you what you ordered and it is kept if you decide to stop. Because I will have to pay 50% of the spoiler to the men when I will order and 50% before despatch to me.

Shippings costs (well protected in a tube) will be 20 eu to UK.

For the stock:

I have 3 fiberglass in stock +the OE.

One have been sold to a member of this forum and will be sent as soon as paid.

Spolier will have 3 screws instead of 5 and "no screw version" is possible too.


What do you suggest to add to our agreement ?

 

[rotorheadcase]

Are you happy to accept PayPal and what shipping cost to Australia please?

Again, many thanks for making this possible

Neil

 

[Parisien]

My 4200 is black too....not sure if the look/effect would be lost in a sea of blackness.....hhhhmmmmm

Must say Nicos looks very smart and at a cracking price


P

 

[mjheathcote]

Happy to pay deposit collectively through the forum or direct.
Regarding 3 screws instead of 5, are we saying Maserati made a mistake and access is not possible behind 2 to tighten a nut?

 

[ahvlanico]

Are you happy to accept PayPal and what shipping cost to Australia please?

Again, many thanks for making this possible

Neil

Hello
Yes I accept paypal Im an old paypal member and it is a good solution to refund if needed. But dont send me money now.
Did you contact me on maseratilife ? I had same question for shipping costs ! it is more expansive for australia than UK, from 40 to 50 euros with a tracking and insurance.

 

[ahvlanico]

Are you happy to accept PayPal and what shipping cost to Australia please?

Again, many thanks for making this possible

Neil

Would be better to buy a fiberglass and paint it I think.. Black carbone on a black car..not sure of the effect..

 

[ahvlanico]

Happy to pay deposit collectively through the forum or direct.
Regarding 3 screws instead of 5, are we saying Maserati made a mistake and access is not possible behind 2 to tighten a nut?

Im ok too for this solution.
I say 3 screws because I think it is enough and only 3 holes to drill so easier and on the 5 screw, 2 are very difficult to access inside the hood. If you want 5 bolts and cut them later its ok for me.

 

[rotorheadcase]

Hello
Yes I accept paypal Im an old paypal member and it is a good solution to refund if needed. But dont send me money now.
Did you contact me on maseratilife ? I had same question for shipping costs ! it is more expansive for australia than UK, from 40 to 50 euros with a tracking and insurance.

No that wasn't me who contacted you but I know there are other members in Australia also interested.

Neil

 

[mjheathcote]

Nico which two screws are difficult to access?
I think I would still go for 5, especially if the outer ones are the difficult ones.
Like you said, if proves too difficult a few seconds with the angle grinder and they are gone!
Thanks.

 

[ahvlanico]

the centered screw is ok, the 2 external screws are ok because there is a hole in the hood to acces to the nut. the most difficults are those between the centered and the external ones.