Alternative parts, what everyone needs to know...

[philw696]

@3hcp Thanks!
@philw696 do you know of a source on the continent? Shipping is a bit silly....

I made my own up after buying some good elastic band and used a needle and thread.

 

[Gooner]

Yes works a treat and simple to install next to existing webbing

Mine arrived and took 10 minutes to fit. Work perfectly (much better than the elastic I’d tried before) and look smooth from the outside.

Thanks again!

 

[Jbridges522]

has anyone got a part number for a MAF sensor that will replace the bosch f00c 2g2 044 one in the 4200? I think its the cause of my EML but cant get one sensor only so will have to look at a unit with the sensor in. Cheers

I swear I've read about a volvo one somewhere but I cant find it now.

 

[Zep]

has anyone got a part number for a MAF sensor that will replace the bosch f00c 2g2 044 one in the 4200? I think its the cause of my EML but cant get one sensor only so will have to look at a unit with the sensor in. Cheers

I swear I've read about a volvo one somewhere but I cant find it now.

Google search is easiest. There are a few references for this in the posts above.
Post in thread 'Alternative parts, what everyone needs to know...'
https://www.sportsmaserati.com/inde...ts-what-everyone-needs-to-know.51/post-290126

 

[Jbridges522]

Google search is easiest. There are a few references for this in the posts above.
Post in thread 'Alternative parts, what everyone needs to know...'
https://www.sportsmaserati.com/inde...ts-what-everyone-needs-to-know.51/post-290126

Thanks, couldn’t find anything through the search.

For anyone looking, this should be right and not a bad price.

Bosch Air Mass Sensor / Air Flow Meter | Euro Car Parts

Bosch Air Mass Sensor / Air Flow Meter at the lowest UK prices from Euro Car Parts UK’s No.1 for Car Accessories, Car Styling & Car Care. Buy today Online, In store or by Phone + Branches Nationwide – Next Day UK Free Delivery.

www.eurocarparts.com

 

[Jbridges522]

Thanks, couldn’t find anything through the search.

For anyone looking, this should be right and not a bad price.

Bosch Air Mass Sensor / Air Flow Meter | Euro Car Parts

Bosch Air Mass Sensor / Air Flow Meter at the lowest UK prices from Euro Car Parts UK’s No.1 for Car Accessories, Car Styling & Car Care. Buy today Online, In store or by Phone + Branches Nationwide – Next Day UK Free Delivery.

www.eurocarparts.com

To update this, it arrived today and it didn’t have the sensor I expected in it, it has a F00C2G8726 sensor. I fitted it anyway out of curiosity and it appears to be running perfectly, and the eml has gone out as the other one was 100% dead.

Has anyone taken a note of the maf reading of their car with the factory sensor that I could compare to?

Cheers

 

[Zep]

Ruining perfectly, bob on then

 

[Jbridges522]

Ruining perfectly, bob on then

Spelling mistake rather than major engine failure thankfully

 

[Wally]

What is the Bosch-number on the tube?

 

[gravissima]

Hi All!

Have looked through as best i can to see if there is an alternative part for a rear wheel bearing - 3200. Have i missed it, is there one?
Thanks in advance

 

[HF-Björn]

Anyone know that's the diamiter of the round vale cover gasket on 3200?

 

[The Adventures of Red19]

Is there a spreadsheet of alternative parts available ?

 

[davy83]

i keep a list here www.maserati3200.net you can just download it. its biased towards the 3200, but might help

 

[joered]

Hi I was browsing E-bay and came across these vents for a MK2 Fiat Punto.they look similar to my vents on my 4200 Spyder so at £12 the pair, I took a punt.
Trouble is my car is away getting a water pump, so I do not know if they will fit,so will let you know, or perhaps somebody has already tried these Punto vents?

 

[safrane]

I discounted these as they are dark gray and not black.

They may look OK if the leather is not black on your car.

 

[joered]

I discounted these as they are dark gray and not black.

They may look OK if the leather is not black on your car.

Changing the colour is no problem,just a spray with Plasti coat. It was if these vents fit a 4200 was what I wanted to know,and perhaps others as well

 

[Zep]

Is there a spreadsheet of alternative parts available ?

To date no one has created a sheet and shared it.

If any members would like to contribute to creating one it would be of great benefit to all of us.

 

[James3200GTA]

I've downloaded Davy83's list a while ago and ran with it. Most of the parts I added (line61 and up) have been fitted, but not all yet: Hardy doughnut in the process of doing now.

 

[GraemeA]

Hi James

I've downloaded the spreadsheet you posted, but it seems to be empty??

 

[James3200GTA]

Hi Graeme,

The data is on sheet #2 in the file. I'm also in the process of updating it with some more info. Unfortunately a bit strapped for time at the moment. So stay tuned.