Gransport replacement door lock walkthrough?
- Thread starter Hexadex
- Start date
CatmanV2
Member
- Messages
- 48,848
Hmm, I did the 4200. Unlikely to be any different. My hands are quite large, and although it was fiddly, it certainly wasn't that hard.
Not sure what I can search on to find the thread, it would be about 5 years ago at least. Assuming I did a thread.
From memory once you take the bolts off it all comes loose and the actuator rods can be removed. Some needle nosed pliers are helpful to get them into the new mechanism (Which I bolted in loosely) then tighten everything up.
One thing I do recall is that one of the plastic brackets on the new lock was smaller diameter than the old one, so the actuator would not fit. PITA until I realised but the work of a moment to swap.
C
Not sure what I can search on to find the thread, it would be about 5 years ago at least. Assuming I did a thread.
From memory once you take the bolts off it all comes loose and the actuator rods can be removed. Some needle nosed pliers are helpful to get them into the new mechanism (Which I bolted in loosely) then tighten everything up.
One thing I do recall is that one of the plastic brackets on the new lock was smaller diameter than the old one, so the actuator would not fit. PITA until I realised but the work of a moment to swap.
C