Zep
Moderator
- Messages
- 9,336
Thanks All.
I have a set of rear toe links on their way (thanks Drew) and when they arrive i will decide where to go for the set up. I am tempted towards TDi in Lakeside. Sam Borgman there is a proper chassis guru and he know's a heck of a lot more than i do about vehicle dynamics. They will match the geo to the tyres (Pirelli) and hopefully will be able to give me more of what I am looking for. The only problem will be parts. I doubt they have any maser bushes in stock so it might be cut and come again. The other option is Roberto in Halstead. Good guy though he most certainly is, he is not a chassis master.
If you are looking to change the bushes then you will be there a while as they take a bit of work and a 10 tonne press to get them out of the control arms.
For the geo set up you can substitute the Ferrari / Maserati shims for washers with a slot cut so they can slide over the bolts which will allow adjustment of the castor at the front and the camber and castor at the rear. To adjust front camber you need a Maser only shim for the upper front ball joint, I bought a few from Superformance before I went for a set up. I didn't need them so passed them on to Catman, not sure if he still has them or threw them in with the sale of his car.