How poor is the Italians at rust prevention?

sionie1

Member
Messages
1,316
What do you mean by up north? I'm planning on going to see these guys in the next few months as I want it doing before next winter. No personal experience but you can be the Guinea pig if you want
The dinitrol site has a list of providers.
I also went on their website however they don’t recommend anyone, only supply the stuff. They do have a list of questions to ask though. Autoshield will be my first port of call I think as it’s not too far away.
 

AndyG

Junior Member
Messages
368
Full steam clean off, remove all loose paint and rust, treat all surface rust, zinc prime then paint with chassis black then inject all cavities including inside doors and under the arch liners and it ends up looking like this, however it does take a hours hard graft, and you need a ramp, whoever has my QP5 now has a solid car.
cc9d9401e686f9e819773e0a59c4785d.jpg

3c4023a5e33f80bff6c7e71bb116f645.jpg

5b2da4e0327c497ed0df3bb60b3a6246.jpg

7d2aab791ded34e2558492de64b68959.jpg



Sent from my iPhone using Tapatalk
 

conaero

Forum Owner
Messages
34,639
Thanks Andy, my next winter project will be to do this on the Strad.

She only ever sees fair weather and remains in a heated garage but I feel it would be prudent to do this.
 

davy83

Member
Messages
2,824
I have been using terotex 350 (which I quite like) which looks to be similar to Ditrinol, does anyone know how long Ditrinol lasts if you use it on exposed metalwork? I know Terotex is great on cavities and steel that is covered from spray but it does wash off eventually from exposed areas.