Panicracing
Junior Member
- Messages
- 376
Has anybody got a workshop manual for 4200/GS available in PDF, doing some suspension work and need torque settings etc
Workshop Manual
- Thread starter Panicracing
- Start date
If there is one available I could do with a copy too. I've go to remove the rear axle shafts on my GS and could do with knowing the torques for putting it all back together. I plan to do much of the work on the car myself so a manual would be very helpful. I'll be happy to share photos etc of any jobs I do in order to contribute to the "how to" collection on here.
CraigWaterman11
Sponsor
- Messages
- 762
80 Nm is the torque spec for the half shafts. For the guys who want the service manual PM me your email addresses. You will have to create a free Drop Box account to retrieve it but a member sent me both manuals (Spyder and Coupe) and a whole bunch of stuff I've never read. Happy to share with others as well.
CraigWaterman11
Sponsor
- Messages
- 762
Lol......well I didn't know if I should tell everyone! But I can share what you gave me. 
Actually so far it's proved quite resourceful! So I thank you good sir!
Actually so far it's proved quite resourceful! So I thank you good sir!
CraigWaterman11
Sponsor
- Messages
- 762
It didn't seem like it to me Chris. If it was I didn't notice. Of course the main thing I've used it for is dropping the gear box and changing the clutch. It's what I expected in a service manual. I'm pretty sure this is what you sent to me. It had a bunch of stuff added like updates. Additionally it was a manual for the Coupe and Spyder separate manuals not just one. I think you sent it to me because my computer went down and ate my other one.
hodroyd
Member
- Messages
- 14,150
I have a basic 4200/GS PDF manual, it only covers the basics and is pictorial as well as descriptive, not everything covered but quite a lot..!! If you need a copy of that you are welcome, send me your email contact by PM and I will send you a link to download it..!!
Craig, if yours is better than mine I would not mind a copy please..??
Craig, if yours is better than mine I would not mind a copy please..??
CraigWaterman11
Sponsor
- Messages
- 762
No problem Rob, what's the email send it to me? Honestly Chris has got me wondering if I have a full manual or not. I'm not entirely sure where I got it now! LOL......I can say that it had all the torque specs I needed, additionally it looked almost identical to the one the Ferrari Tech had at the Aston Martin dealer when I was speaking to him. At that time he told me that the manuals they put out weren't that great. So I figured this was just what they did. Either way, I can send it to you and if you don't need it or think it's something you already have then you can delete it. Chris if you want to check it to see if this is one I received from you or someone else I can put your email address in as well. It's very possible that I did receive it from someone else, it was a few month ago, and I have to admit I keep busy at times and weeks seem like months to me.
it's for the 4200..are you thinking of buying one?
CatmanV2
Member
- Messages
- 48,904
Yes. Massively incomplete.
I know Larry has the full one, and I'm negotiating to see if I can have a crack at the copy protection
C
CraigWaterman11
Sponsor
- Messages
- 762
Oh well, rofl, guess I'm better with cars that I thought! Well, if I would have known that........too late now I suppose.
Well, if I would have known that........too late now I suppose.
Contigo
Sponsor
- Messages
- 18,376
Contigo
Sponsor
- Messages
- 18,376
Robert, I've got the 3200 one in Digital/pdf format. I just want to keep a copy of the 4200/GS too as in the past the links have been broken online and I've never managed to find a reliable source.
CraigWaterman11
Sponsor
- Messages
- 762
No, I want to make sure I know how to fix one should yours break down tonight
ha ha.....that's funny! You guys over here have a much better sense of humor. I appreciate the manual as well seems like that was the one I had as well. I appreciate it guys.