Xenon Effect Bulbs - 3200

[Dyer3200]

With Italian electrics am I asking for trouble - anyone tried ?

http://www.eurocarparts.com/ecp/p/c...qrCg.E3eJ.Ar8q9g..A3QPVg.b..s.Ah6P.n...kmELTg

 

[CatmanV2]

They should be fine, but not sure how much better they will be.

C

 

[Dyer3200]

Really H4 or H7 ?

 

[CatmanV2]

Really H4 or H7 ?

High beam or dips?

According to my sheet High is H1. I *think* dips is H4, but that really needs confirming.

C

 

[Dyer3200]

Dips is fine - any error messages ?

 

[Dyer3200]

Or is LED the answer ?

 

[CatmanV2]

Or is LED the answer ?

There shouldn't be any warnings with those bulbs. They are standard halogen technology.

C

 

[Rex B]

My 3200 has H1 for high and dip beam and I fitted osram plus 110% and have Philips plus 110 in my 159 both are a good upgrade and no problems.

Rex B
Manual3200

 

[StuartW]

I had a set of Osram in my 3200 and they were a big improvement

 

[w1lde1]

Is this a straightforward bulb change in a 4200? My main beam and dim are not very bright at all so anything I can do to improve


Sent from my iPhone using Tapatalk

 

[miket]

Osram Nightbreakers for my spyder, no issues and a great improvement!

 

[CatmanV2]

Is this a straightforward bulb change in a 4200? My main beam and dim are not very bright at all so anything I can do to improve


Sent from my iPhone using Tapatalk

It's just a swap, but it's wheel off stuff I understand.

C

 

[richi]

Hi guys, I've had the OSRAM Nightbreakers but they were still too yellow-ish for my taste. So I swapped them out again for MTEC "Super White". Both with H1 Socket. The MTEC are 4350K and look really white. But I think that they're not as bright as the OSRAM (think this is a general issue with white or blue bulbs) You will also get access to it by lifting the car on one side with a jack.

Richard

 

[Spartacus]

Iv got Osram Nightbreakers in my 42, i got this bloke to fit them ;P