Search results

  1. G

    Important ----rear axle issue

    Hi, a while ago I posted a message about a knock from the rear of my 2004 4200 coupe. Having checked out tie rods, gearbox mount and shocker top mounts I decided it was the rear anti roll bar bushes. The clonk seemed to be coming from the nearside (UK) and there appeared to be a mark where the...
  2. G

    Rear shock absorber removal

    Hi, I may have missed this but is there a guide anywhere to removing the rear shocks on a 4200 GT. I have removed all the boot liner gubbins but there appears to be virtually no access to the top of the shocks either side of the fuel tank. In fact as far as I can see along the top of the wheel...
  3. G

    clonk from rear

    2004, 4200 coupe Hi, From time to time I'm getting a clonk from the rear end. I've checked the anti-roll bar mountings and they have no play. Can't find any evidence of play in various suspension bushes. I've had a suggestion that gearbox mountings go frequently on these cars. Has anyone any...
  4. G

    Xenon problems-2004 4200 coupe

    I know there's been a few posts on this before but, for what it's worth, this is my experience: Car laid up over winter (battery conditioner attached) first run last week just fine, except, offside (offside UK) dipped beam out. Fuse ok and, according the handbook, one relay works both dipped...
  5. G

    Easy Entry seat ECU

    Hi Guys, I have a put a new "easy entry" seat ECU on E-bay (fits 4200 series cars plus 3200 series). Item number:321074129794 cheers
  6. G

    Easy entry seat ECU

    Hi Guys, I have a put a new "easy entry" seat ECU on E-bay (fits 4200 series cars plus 3200 series). Item number:321074129794 cheers
  7. G

    Toe settings

    4200 toe settings Hi, Does anyone have the correct factory front and rear toe settings for a 4200 coupe (2004). I have done various searches and come up with different figures. The correct front camber setting would also be very useful too. Thanks
  8. G

    4200 toe settings

    Hi, Does anyone have the correct factory front and rear toe settings for a 4200 coupe (2004). I have done various searches and come up with different figures. The correct front camber setting would also be very useful too. Thanks
  9. G

    Reversing switch 4200 coupe

    Thought the two attached pix may be useful. Found on a late night trip last week the reversing lights were coming on (with a bleep) every time I changed from third to second (much to the consternation of following drivers). Pulling off the gearlever gaiter revealed the microswitch was flapping...
  10. G

    4200 Coupe for sale

    2004 Maser 4200 Coupe for sale by owner. Only 34k miles, detailed service history, huge spec and PROPER MANUAL GEARBOX. peterjgriffiths@btinternet.com
  11. G

    New rear wheel for 4200 coupe

    I have a brand new 18 inch BBS rear wheel for 4200 coupes. Probably also fits Spiders. It's the optional seven spoke item in Mercury Grey Maserati part number 199035. They are about £850 from Europarts inc vat. I'm looking for about £450. Pls e-mail me on peterjgriffiths@btinternet.com (pls...
  12. G

    Circuit des Remparts

    Three of us taking Maser to Angouleme (Sept 17-19th) to take part in rally on the Saturday and watch the circuit racing on the Sunday. Going and returning Plymouth-Roscoff. Anyone else going?