Can someone confirm if the fact that my 3200 needs 30 seconds with the ignition off after stalling it before it will restart is a design feature or not? The same applies if I turn the car off after a run then try to immediately restart. It occurs at any time after the car has been running for a short while.
Everything which should happen in terms of dash lights and the engine cranking is normal. It just does not fire. If I leave it for 30 secs and try again, it then fires up as normal. No signs of excess fueling or anything.
The only odd thing is that if I start the engine, then switch it off after 2 or 3 secs, it will then restart.
What should I be looking at?
Everything which should happen in terms of dash lights and the engine cranking is normal. It just does not fire. If I leave it for 30 secs and try again, it then fires up as normal. No signs of excess fueling or anything.
The only odd thing is that if I start the engine, then switch it off after 2 or 3 secs, it will then restart.
What should I be looking at?