I bagged a pair of pre-facelift lights on ebay for cheap and set about splitting them apart for a custom LED retrofit
Some (very) gentle prying got the lenses off
And then removing the small screws in the back allow both diffusers to be removed
Need to design the lights next (e.g shapes) and wait for some hardware to arrive. Bit of blank canvas on the design front , want to retain some design cues whilst giving a modern look (e.g Sequential turn).
This kind of vibe
I'll update this thread as I go.
Some (very) gentle prying got the lenses off
And then removing the small screws in the back allow both diffusers to be removed
Need to design the lights next (e.g shapes) and wait for some hardware to arrive. Bit of blank canvas on the design front , want to retain some design cues whilst giving a modern look (e.g Sequential turn).
This kind of vibe
I'll update this thread as I go.