Error codes for breakfast plus early Christmas present

Ian H

Member
Messages
167
Hi all
Dropped number 1 son to footy this morning and the old 3200 went into limp mode on way home.
Turned ignition off and restarted and it went away
Quick check and the error code is:

Po221 throttle/pedal position sensor switch B circuit range performance problem.

This sounds like an adventure into the world of contact less throttle body and new pedal sensors or maybe just a grumpy car on a damp morning? Anyone had this code before and got to the bottom of it without a shed load of new bits?

I also have a PO500 vehicle speed sensor malfunction error which has returned having been cleared last time round so presumably it I s a real issue. The car seems to behave fine but I need to get it fixed. Anyone know where this sensors is and whether it is a common problem?


Finally I made up a USB cable to plug into the old style ODB socket but which has an integral power lead to plug into *** lighter. Transpired I have old car but new style plug so don't need it. If anyone would like this for Christmas just let me know?


Thanks
Ian
 

allandwf

Member
Messages
11,012
I had this, but was caused by me anadvertantly standing on throttle before car had completed it's checks, ( 14 beeps.) Cleared it and kept feet well away, never reoccurred. Yours may be throttle pot as occurred whilst driving.
 

davy83

Member
Messages
2,829
I have one contact-less pedal sensor available if you are in need sir. Have you kicked or disturbed the wiring down by the pedals recently? check the connector is plugged in ok, and maybe pull it out and replug it in case its just a bad contact? its a little white connector near the pedal sensor.