Ha - that is probably the easiest solutionRemove one of your bolts, measure the distance from the end to the taper, add 17mm and then buy bolts with the spec you had above.
I am getting 50mm from bottom of taper.
View attachment 111223
Don’t H&R spacers come with bolts? Mine did (22 mm & 25 mm)Looking at the H&R 17mm spacers, they need extended length bolts.
Could someone let me know the specs which would be needed? A fool proof link would be great...
I've seen the standard bolts are m14x1.5 22mm for the GranTurismo.
The spacers thinner than 22mm use extended bolts, the thicker ones bolt onto the hub.Don’t H&R spacers come with bolts? Mine did (22 mm & 25 mm)
The bolts on mine are a match to the OEM bolts. I would only use hub centric spacers myself.One of the several reasons I won’t do spacers is the length of the bolts. If you buy from a reputable seller, you are probably also contributing to their PL insurance premium.
Triggered, sorry!Well they are the garage carpet slippers. This is the Strad side and now complete under Spider also.
View attachment 111225
Eh?Triggered, sorry!
C
Ah no. Tight to the wall and reverse in so I can get out. Spider drives in forward to do the same.
View attachment 111256