FD Drive by wire wiring diagram

[mjheathcote]

Having purchased a FD DBW module from a forum member, I am in need of the mating loom and wiring diagram.
These are not available alone from Performance Italia / Formula Dynamics any more, due to a change in policy.
I can send the unit back to Formula Dynamics, who will test and repackage the unit, complete with new loom, but this is $250 plus shipping both ways to America and back and possible import tax if not careful.
I would like to avoid this if possible, especially as the unit was fully functional when removed, and already configured to my required spec and vehicle model.
I can easily make a loom myself no problem, but would like a copy of the wiring diagram installation instructions, if anyone has this info?...I dont imagine anyone would have a spare loom?!!
If anyone can help, you can PM if you wish.
If all else fails, it's back to its maker!
Cheers,
Mike

 

[lozcb]

Having purchased a FD DBW module from a forum member, I am in need of the mating loom and wiring diagram.
These are not available alone from Performance Italia / Formula Dynamics any more, due to a change in policy.
I can send the unit back to Formula Dynamics, who will test and repackage the unit, complete with new loom, but this is $250 plus shipping both ways to America and back and possible import tax if not careful.
I would like to avoid this if possible, especially as the unit was fully functional when removed, and already configured to my required spec and vehicle model.
I can easily make a loom myself no problem, but would like a copy of the wiring diagram installation instructions, if anyone has this info?...I dont imagine anyone would have a spare loom?!!
If anyone can help, you can PM if you wish.
If all else fails, it's back to its maker!
Cheers,
Mike

Pat (masersod ) has the factory wiring diagram that i supplied him failing that did you try contacting Andy the guy who owns the Pats old copper coloured Gransport , the loom , past original loom is probably still tucked under his dash somewhere

Aplogies ive only just got your pm


regards loz

 

[Emtee]

did you try contacting Andy the guy who owns the Pats old copper coloured Gransport , the loom , past original loom is probably still tucked under his dash somewhere

regards loz

His forum moniker is Grinzzz if you want to drop him a PM

 

[mjheathcote]

Thanks Loz, Miles.
I didn't know who Pat and Andy was, but do now masersod and Grinzzz!
Cheers,
Mike

 

[Grinzzz]

Unless someones about to sell a GS configured box (anyone?) that I can just plug straight in you'd be welcome to it, provided a) we can find it and b) it comes out without damage or hours of patching back the car loom! Or is it just a plug straight in job? I did have a nose under the dash when routing the microphone in - must admit I didnt see anything obvious.

 

[mjheathcote]

Unless someones about to sell a GS configured box (anyone?) that I can just plug straight in you'd be welcome to it, provided a) we can find it and b) it comes out without damage or hours of patching back the car loom! Or is it just a plug straight in job? I did have a nose under the dash when routing the microphone in - must admit I didnt see anything obvious.

To be honest Andy, once the loom has been fitted, it's best to leave it as the wires are cut and soldered to the original, as much as I would like it.
There is nothing really to the loom, I just need the instructions with wire colours to make my own.

Thanks for the reply,
Cheers,
Mike

 

[mjheathcote]

Just an update, I have failed to locate a wiring diagram, so today I posted the module back to its maker for check over, loom, and installation instructions.
At least I will know it will be right for my car, and sellable in the future.
Cheers.