Ashventini
Member
- Messages
- 161
Hi. Just had my 1st service down at Graypaul. I asked them to re-set the memory on the passenger seat. It did not automatically traverse forward when pulling the top latch to access the rear of the car. The driver works fine and traverses forward when the latch is pulled, but passenger doesn't. Graypaul said it was full of debris. They removed some stuff - coins etc. They did say to be 100% sure they would need to remove the seat and clean out the track. This was possibly the reason for memory lose. Ive had a look as best I can and cannot see anything in the track and it looks quite clean. It traverses forward and back with relative ease and feels smooth, nothing obviously grinding or anything. I am actually now questioning whether the seat does automatically have a memory setting on the passenger seat? There certainly isn't a button cluster to set memory like the drivers side. Worse still Graypaul want £600 to take the seat out (4 bolts and a wire unclip) clean the tracks and re-fit it. Of course I am not going to entertain that.
I wonder now if the seat even has the auto - traverse forward function on the passenger side.? I know there has been previous threads about doing the re-set etc, but I haven't found a simple yes / not answer from other threads and even the re-set people give instruction are not clear. Thanks for the advise in advance.
Ash.
I wonder now if the seat even has the auto - traverse forward function on the passenger side.? I know there has been previous threads about doing the re-set etc, but I haven't found a simple yes / not answer from other threads and even the re-set people give instruction are not clear. Thanks for the advise in advance.
Ash.