Loudlink Issue

[omar_little]

Hi

I performed a throttle reset on my 4200 a few weeks ago and since then my Loudlink has stopped working. I can read the SD card from a PC and I can see the tracks located in the various folders. When I power the unit on, a red light comes on briefly and then goes out. When I select source from the stereo unit, the multi CD is not recognised and it just skips from CD back to radio. I contacted the guys at Loudlink, but they have not replied!!!

Any suggestions or did the loss of power during the reset possibly cause the failure of the Loudlink unit?


Sent from my iPad using Tapatalk HD

 

[2b1ask1]

Not a problem, I'm guessing the SD card you have in it is > 2gb whilst the loud link can play from HCSD (> 2gb capacity) to set it up you must use a SD card formatted to < 2gb with the flash file on it. Just put a couple of tracks in. Each folder just to test it. Pop it in and turn on and it will initialise just fine.

Good luck.

 

[omar_little]

Yep it's a 2Gb SD card with the flash file and a few tracks loaded. I even tried formatting the card and starting from scratch again.

 

[2b1ask1]

I use a 128mb SD card for this. You may need to isolate the battery for a moment and start again.