Andy4200
Member
- Messages
- 149
Hi,
I recently re-furbished my gearbox end gear linkage, thought some people may be interested. I manged to replace all the bearings in the linkage and the ball joints. I think the total refurb cost was around £30.
I could probably find the info for the bearings I used if required, however they are stamped on the side of the originals so can just be cross referenced.
The gearchange is now fairly light and slick!
I recently re-furbished my gearbox end gear linkage, thought some people may be interested. I manged to replace all the bearings in the linkage and the ball joints. I think the total refurb cost was around £30.
I could probably find the info for the bearings I used if required, however they are stamped on the side of the originals so can just be cross referenced.
The gearchange is now fairly light and slick!
Attachments
-
20230210_161950.jpg110.7 KB · Views: 31
-
20230309_094941.jpg28.5 KB · Views: 32
-
20230309_165558.jpg57.7 KB · Views: 30
-
20230309_165617.jpg81.8 KB · Views: 30
-
20230309_170727.jpg112.2 KB · Views: 30
-
20230318_144305.jpg121.7 KB · Views: 33
-
20230318_163858.jpg80.7 KB · Views: 34
-
20230415_171236.jpg122.8 KB · Views: 31