The fronts needed doing...
My little tool lasted enough time to take both wheels apart, but 3 are seized in !!! The aluminium / steel issue - will get the wheel refurb guy to use some heat to get them out. About an hour on each wheel, every so often i had to hammer the tool to get a flat back on the side. I used an impact gun on the nuts.
Cut the seal and use a bit of wood and a hammer to knock them apart.
That means i have lost three bolts...... I am ok with that as having done the rears previously they are an atrocious design for a bolt and will use alternatives !
One appears to have been apart before, bolt heads all pointing in different directions.
Wheel refurb company will do the barrel and the facia i have found a polishing company that can do the rims and chrome plate the wheel bolts.
My little tool lasted enough time to take both wheels apart, but 3 are seized in !!! The aluminium / steel issue - will get the wheel refurb guy to use some heat to get them out. About an hour on each wheel, every so often i had to hammer the tool to get a flat back on the side. I used an impact gun on the nuts.
Cut the seal and use a bit of wood and a hammer to knock them apart.
That means i have lost three bolts...... I am ok with that as having done the rears previously they are an atrocious design for a bolt and will use alternatives !
One appears to have been apart before, bolt heads all pointing in different directions.
Wheel refurb company will do the barrel and the facia i have found a polishing company that can do the rims and chrome plate the wheel bolts.