How about this as a Challenge ?Today is bleak. Getting a car dropped down that has been to multiple garages and a main dealer. A 16plate chevrolet captiva 2.2d 50k miles doesnt run right. Has had fitted ecu, cam, crank sensors and wiring loom. The guy has over 2k on it now and still not fixed. Quite a simple fix I think but its cold in the workshop today. Other jobs, rr sport immobiliser and key set programming. Then a few buttons to paint for a guy thats doing a custom ice install on his 4200.
Sent from my SM-G973F using Tapatalk
Duplex mismatch was one that used to get on my nerves when dealing with different telcos. If its cisco gear TDR was always a good starting point for making sure the cabling is good.At a guess the firmware for the ethernet driver was having a little lie down. I had something similar yesterday evening. Made no sense at all. Dropped the port administratively, bought it back with exactly the same settings, and suddenly we're on line again.
C
Duplex mismatch was one that used to get on my nerves when dealing with different telcos. If its cisco gear TDR was always a good starting point for making sure the cabling is good.
Sent from my SM-G973F using Tapatalk
A big thanks to StickyPlastics for taking this on. Having previously approached the US guys I was left surprised to find that they were not in the slightest bit interested. One in particular was particularly unfriendly, whereas, Roland has been a pleasure to discuss this with. In short, he couldn't have been more helpful. Taking my rough scribes and redrawing into something he could use.Then a few buttons to paint for a guy thats doing a custom ice install on his 4200.
I'll give you the pleasure to show the finished photo all ended well. Thanks to our US partners that are all about something; going forward they may be more helpful to fellow owners.A big thanks to StickyPlastics for taking this on. Having previously approached the US guys I was left surprised to find that they were not in the slightest bit interested. One in particular was particularly unfriendly, whereas, Roland has been a pleasure to discuss this with. In short, he couldn't have been more helpful. Taking my rough scribes and redrawing into something he could use.
Although Edwin247's bezel looks great my preference was to modify an original surround. Giving the option to retain a number of buttons which have been reassigned different functions. The final piece of the jigsaw was custom legends that depict the new functionality. Thank you to Roland for making it possible.
Thought I'd add a button to show they "light up". I can illuminate whatever colour you require inclulding metallics. Food for thought guysI'll give you the pleasure to show the finished photo all ended well. Thanks to our US partners that are all about something; going forward they may be more helpful to fellow owners.
Sent from my SM-G973F using Tapatalk
Well that's distinctly average isn't it!Thought I'd add a button to show they "light up". I can illuminate whatever colour you require inclulding metallics. Food for thought guys
Sent from my SM-G973F using Tapatalk
Morning,A very good Saturday morning to all. Have a great weekend whatever you are doing.
Morning,
You’re up early ,
DIY weekend for me, new bedroom cupboards arrived from ikea, so old to dismantle and new to build, and en-suite to finish.
Have a good day,
Dave