Torque Specs etc

[alastairb]

Hello,
Does anyone have a link to suspension torque specs?
In particular the drop links and anti-roll bar brackets for the rear.

Cheers
Al

 

[Sam McGoo]

Hello,
Does anyone have a link to suspension torque specs?
In particular the drop links and anti-roll bar brackets for the rear.

Cheers
Al

I think I put a post somewhere of them all on.... I'll have a search, if you can't find them.

 

[Sam McGoo]

Have a look here - https://www.sportsmaserati.com/inde...o-s-suspension-torque-specs.35654/post-931641

 

[Chiveroni]

I'm slowly creating a file with all torque specs. I've created a sheet just for suspension. This is for a 2014 GT Sport but I assume the same for normal GT 4.7? You can download it from my OneDrive here: https://1drv.ms/x/s!AhEU8q451J4Ogvo-DeiL8Ss6z4xLhQ?e=4LAQRJ

 

[alastairb]

Thanks guys, it's a QP5 ZF I'm after but it will be in the same ballpark.

 

[conaero]

Wheel bolts 105nm
Caliper bolts 100nm
Track rod ends 65nm
Top arm bolts you won’t get a torque wrench in there so long spanner f’in tight

 

[alastairb]

Thank you, would you be able to confirm drop links and anti roll bar brackets/mounts on rear? I suspect it's same as Granturismo.

 

[conaero]

Both we tighten to feel. ARB D bush brackets you don’t need to go too strong. The threads are not wide so tight is enough. You don’t want to deform or slip the hex heads.

Droplinks the same.

Rule of thumb the thicker the thread the tighter you go.

The one you do want to torque are the track rod ends. Go over 65nm and the tread will twist off. Brake calipers and wheels are the important ones at 100/105nm