Wanted: front anti-roll bar 3200 Asetto Corsa (25 mm)

[Campoverde77]

Wanted:

front anti-roll bar 3200 Asetto Corsa (25 mm)

Regards,
Joris

 

[Contigo]

Good luck, rare as rocking horse manure!

I fitted one to mine and it transforms the car!

 

[highlander]

Good luck, rare as rocking horse manure!

I fitted one to mine and it transforms the car!

Show off.....

 

[jluis]

I have one attached to my AC
Interested in buying it?

 

[allandwf]

Was there not a run of these made?

 

[Contigo]

Dave (alfatwo) was talking about having some made up. I will be up for buying one if it is under £100.

 

[alfatwo]

Dave (alfatwo) was talking about having some made up. I will be up for buying one if it is under £100.

That lot up around Derby "123 Manufacturing" as usual were a complete waste of time and I made big effort. We had at the time around 8 or 9 orders for the 3200 front bars!

Then they moved, now I think they've gone bust..

To bring everything up to date, I've been on to Classic Alfa's roll bar man..When I get some spare time I'll roll over with the
drawings and see what he has to say

By the way the Nornale 3200 front bar is 20mm where's the Corsa version was 22mm!

Dave

 

[spkennyuk]

Wanted:

front anti-roll bar 3200 Asetto Corsa (25 mm)

Regards,
Joris

I have no idea if the anti roll bar is still on the car but its worth an enquiry if you have not already contacted them :-

http://www.eurospares.co.uk/cars-breaking-for-spares/car/17

 

[greeny12]

I have no idea if the anti roll bar is still on the car but its worth an enquiry if you have not already contacted them :-

http://www.eurospares.co.uk/cars-breaking-for-spares/car/17

Crikey - not sure I'd fancy the anti roll bar off that!! Or anything else for that matter

 

[jluis]

Crashed at 230 km/h according to the dash.... Scary....

 

[safrane]

Think it fell off a cliff to reach that speed.

 

[allandwf]

Crikey - not sure I'd fancy the anti roll bar off that!! Or anything else for that matter

Agree, wheel nuts are probably only salvageable bits!

 

[NickP]

I'd be interested in getting a pattern part if anyone is able to source.

 

[highlander]

I'd be interested in getting a pattern part if anyone is able to source.

yup, me too. the lolling around corners is the only bit that bugs me about the 32.

 

[LDM 3200]

Might be interested too.
Should the springs be changed as well?

 

[redsonnylee]

Might be interested too.
Should the springs be changed as well?

+1

 

[greeny12]

I'd also be keen on a forum special ARB in AC spec...

 

[RSM Masser]

Agree, wheel nuts are probably only salvageable bits!

I don't think I'd trust a light bulb from that wreck!

 

[chad5k1]

+1

Springs would not need changing as well.

 

[Campoverde77]

Hi guys,

Thanks for the reactions so far.

Checked eurospares for the wrecked ac but no arb.

I would be interested in a patern ac arb or any other stiffer after market example.
Unfortunately the 4200 arb does not fit.