What have you done to your Maserati today?

[P5Nij]

Removed the Biturbo from my neighbour's drive after he told me a couple of lads had been eyeing it up during the night, I parked it there as we've had a new roof put on the house so I had to move both it and the FIAT 500 out of the way. It's well off the main road so the scrotes must have gone looking for it.

 

[DLax69]

Dropped QP for a new set of Contis to replace the Pirelli Mankillers...waiting to retrieve...

 

[Bebs]

-Booked Wheelworx in to refurb a used Neptune alloy purchased from Eurospares to replace my buckled one.
-Booked in 360 with Audiofile Incar for Apple CarPlay floating screen installation.
-Booked in 360 with National windscreens for windscreen replacement due to a large crack having appeared out of nowhere.
-Dropped off 360 back at AV Engineering for a heater issue, a creaking driver’s window and a few other small bits.
Hopefully, that should see both cars fighting fit for several planned road trips this spring/summer.

 

[Felonious Crud]

Gah, nuts! Delays to getting the car back on the road due to a balls up with the new carbon central dash being over-polished straight through the clear coat and screwing up the carbon.

 

[DLax69]

Gah, nuts! Delays to getting the car back on the road due to a balls up with the new carbon central dash being over-polished straight through the clear coat and screwing up the carbon.

View attachment 124157

Gotta admit, that's a new one on me...how?

 

[Felonious Crud]

Gotta admit, that's a new one on me...how?

Feck knows! Something to do with trying to polish the new clear coat and going straight through. Boneheads.

edit: once the carbon is bonded to the aluminium frame of the central dash components, it gets layer upon layer of clear coat, polish, clear coat, polish until it's free from any imperfections. It was on one of the polishing cycles that they cocked it up. The carbon then needs to be fully ground off and the process started again. It'll be worth it; the quality of their products is exceptional. Eventually.

 

[Brendan]

Kerbed the wheel. Grrrrrr...

 

[CatmanV2]

Looked at mine in the hotel car park, and had a quiet smile.....

C

 

[safrane]

-Booked Wheelworx in to refurb a used Neptune alloy purchased from Eurospares to replace my buckled one.
-Booked in 360 with Audiofile Incar for Apple CarPlay floating screen installation.
-Booked in 360 with National windscreens for windscreen replacement due to a large crack having appeared out of nowhere.
-Dropped off 360 back at AV Engineering for a heater issue, a creaking driver’s window and a few other small bits.
Hopefully, that should see both cars fighting fit for several planned road trips this spring/summer.

Are you fitting the vent covers whilst the screen is out, or has that been done?

 

[DLax69]

Drove the QP rapidly to the hospital ER for a kiddo with a broken arm...then to pick up dinner, then to the pharmacy, and then back home. Totally different car with the Continentals...in a good way

 

[todd.the.submariner]

Drove the QP rapidly to the hospital ER for a kiddo with a broken arm...then to pick up dinner, then to the pharmacy, and then back home. Totally different car with the Continentals...in a good way

Yikes! Hope the kiddo is alright and you find less stressful ways to stretch the QP’s legs. And yes, those Contis are top notch for all seasons. Have them on my BMW for winter track days as well as on the QP.


Sent from my iPhone using Tapatalk

 

[DLax69]

Yikes! Hope the kiddo is alright and you find less stressful ways to stretch the QP’s legs. And yes, those Contis are top notch for all seasons. Have them on my BMW for winter track days as well as on the QP.


Sent from my iPhone using Tapatalk

Thanks...Anne, tree swing, jump off at apex. In a cast above the elbow but was as stoic throughout as anyone I've ever witnessed...

 

[CatmanV2]

Thanks...Anne, tree swing, jump off at apex. In a cast above the elbow but was as stoic throughout as anyone I've ever witnessed...

GWS!

C

 

[MrRMB]

Chewed wire all sorted. Now running happily. Put it on the ramp, removed the undertray and arch liners to do a bit of lanoguarding and proper clean. Any ideas of where to get the little 7 mm screws? Thanks.

 

[joered]

Went to car club breakfast in Doune took my camera to take photos of our group and forgot to do it, doh!
However it was great to take car out, even thought it got wet!

 

[midlifecrisis]

Blast back from Des'seseseses cafe in Andover and had a nice drive along the A272. Keep it secret but it's a great road from Winchester to Haywards Heath and beyond. Especially if you miss all the lycra louts, car boot salers, walkers. Not the best weather but good to refamiliarise myself with the GT for the year ahead.

 

[stikey]

 

[Nayf]

Helped to make green great again at Caffeine and Machine, as did this rather tasty looking pair.

 

[TimR]

Chewed wire all sorted. Now running happily. Put it on the ramp, removed the undertray and arch liners to do a bit of lanoguarding and proper clean. Any ideas of where to get the little 7 mm screws? Thanks.

Honestly, I’d try to find a correctly sized screw with a better head ( cap head or torx/ Torx+?) as OEM can be improved upon imo…! ( arch liner fixings, right? )

 

[ian roberts]

Car cleaned and sparkly now, been using it on a few dry days over the winter but still gets a bit grubby, such a pleasure to clean and then admire.