salvatore ruffino
New Member
- Messages
- 3
Hello,
I have an 06 GranSport with Cel light on/car has no power over 4k.
Comes up as follow
p1151 accelerator pedal potentiometer 2 potentiometer 2 position value inconsistent with potentiometer 1 position and throttle position voltage value low wiring / component intactness check p1189 accelerator pedal potentiometer potentiometer 1 position value inconsistent with potentiometer 2 position and throttle position voltage value not plausible wiring / component intactness check
I have a coupe parts car, Swapped Throttle Pod sensor, Cleared code and performed the following relearn
turned ignition on for 2 mins 12 sec, turned off.
turned ignition back on held throttle down for 30 secs, released pedal, turn ignition off.
test drove, same symptoms. Cel light back on.
this seems to be a common issue. but not having any luck getting this fixed.
Any help would be greatly appreciated.
Thank you in advance
I have an 06 GranSport with Cel light on/car has no power over 4k.
Comes up as follow
p1151 accelerator pedal potentiometer 2 potentiometer 2 position value inconsistent with potentiometer 1 position and throttle position voltage value low wiring / component intactness check p1189 accelerator pedal potentiometer potentiometer 1 position value inconsistent with potentiometer 2 position and throttle position voltage value not plausible wiring / component intactness check
I have a coupe parts car, Swapped Throttle Pod sensor, Cleared code and performed the following relearn
turned ignition on for 2 mins 12 sec, turned off.
turned ignition back on held throttle down for 30 secs, released pedal, turn ignition off.
test drove, same symptoms. Cel light back on.
this seems to be a common issue. but not having any luck getting this fixed.
Any help would be greatly appreciated.
Thank you in advance