Today I tackled a job that has been niggling me every time I get behind the wheel,
( and sometimes even when not driving ! )
Puckered leather on the airbag/steering wheel.
Probably one of the simplest jobs I have undertaken...
1) Lower drivers window
2) Isolate battery
3) Remove airbag by undoing the 2 screws from behind (security torx head)
4) Disconnect cable connector
5) carefully peel back leather
6) Remove all traces of old glue and clean
7) Apply new glue to both surfaces
8) Enjoy a nice cuppa whilst waiting for glue to touch dry
9) Press leather firmly back into place
10) Reassemble
Whole process took less than 1 1/2 hours and I was taking my time...
Many thanks for the workshop space, tools and tea Roberto
Some before, during and after pics...