Detailing Day...
- Thread starter EnzoMC
- Start date
EnzoMC
Member
- Messages
- 1,999
Rossyl - I think this is the main point that everyone wants so you should be OK
think MAF was looking to bring his DA, think this would be a good idea - so if any of you have DAs or Rotary bring them a long, I have a few pads you can use on the day.
so thinking about time we'll have for the mornings:
- overview on basic do's and don'ts
- da v rotary
- difference compounds
- saftey / burn through
if anything you guys have any other points you want covered lets us know
think MAF was looking to bring his DA, think this would be a good idea - so if any of you have DAs or Rotary bring them a long, I have a few pads you can use on the day.
so thinking about time we'll have for the mornings:
- overview on basic do's and don'ts
- da v rotary
- difference compounds
- saftey / burn through
if anything you guys have any other points you want covered lets us know
EnzoMC
Member
- Messages
- 1,999
rossly i would say if you can make it, great and we'll cover off as much we can before you need to go but will be dependant on what the group wants, we could catch up on anything missed with Roger on a sunday morning
ok all...tomorrow morning bootcamp time, i try and get onsite at 8:30 (start setting up) i think due to time we will then start around 9am
as i said before this is open to what you guys want to cover, one thing i would like to cover is the dos and donts (prep) - if this isn't right then no point machine polishing which i think will be the main topic
please bring any thing you want to test with
i think we have 4 or 5 coming - great see ya all tomorrow morning
ok all...tomorrow morning bootcamp time, i try and get onsite at 8:30 (start setting up) i think due to time we will then start around 9am
as i said before this is open to what you guys want to cover, one thing i would like to cover is the dos and donts (prep) - if this isn't right then no point machine polishing which i think will be the main topic
please bring any thing you want to test with
i think we have 4 or 5 coming - great see ya all tomorrow morning
Last edited:
A great morning, very informative. Big thanks to Darren for taking the time to talk us through and demonstrate how to do things properly. Thanks also to Sacha (nice to meet you) for organising the venue and car to practice on.
Whilst a shame that more members couldn't make the session, it meant that Sacha and I got even more of Darren's time!
Whilst a shame that more members couldn't make the session, it meant that Sacha and I got even more of Darren's time!
EnzoMC
Member
- Messages
- 1,999
no pictures, I made sure they were working
its was a great morning and Brian was great to provide this setup for us - I was surprised when showing the guys how you can burn through paint how difficult it was on the demo car - did get smoke coming from the panel I do have one more session that I said I'm OK to do, was looking to do this at mine but could do this at another location were we can get a few more and get a test panel again if poss
options / suggestions ?