mjheathcote
Centenary Club
- Messages
- 9,046
As the FD anti-sways are substantially bigger in diameter than the OEM bars, can't image any problem with clearance.
craig,
Assume in the above pics. the vehicle was up on hoist with no weight on the four corners.. correct?
If so any clearance issues when full weight on
As the FD anti-sways are substantially bigger in diameter than the OEM bars, can't image any problem with clearance.
Txs Craig
Let us know costs etc and when we can place orders
Perhaps we can bulk up requests in this thread
Mike, out of interest what's the diameter of the standard 4200 front bar...
Dave
Don't know the standard diameter haven't crawled under yet!
Can tell you the new FD replacements look like bent scaffolding poles with regard to the diameter!
Front 38mm rear 24mm.
You also have the option of two end positions on both bars for the drop link attachment to stiffen up further to change the front rear balance of the car.
What's the 3200/AC diameter?
You can see why 3200's roll around like ships in a storm...22mm front 15mm rear!
Dave
The AC bar I had on my manual 3200 made a massive difference compared to the standard auto car. Best mod you can do to the car IMO.
What's the difference in diameter?
22mm for the AC ..20mm for the Normale
God knows where FD got 38mm from!
Dave