Zaca

Zacaria

New Member
Messages
2
Please help for bleeding clutch and actuater to can make self learning

Sent from my SM-A520F using Tapatalk
 

conaero

Forum Owner
Messages
31,106
Hi, as I understand it, you have a 4200 and you are trying to bleed the clutch lines, correct?

You will need 1L CS Speed fluid.
  1. Remove the reservoir cap and have someone fill it while you undo the nut on the bottom of the clutch bell housing.
  2. As I assume you do not have Diagnosi or such scan tool, you can open and close the drivers door to trigger the pump.
  3. Repeat several times until the fluid runs consistently with no spitting and do the drain nut up before the pump stops priming
  4. Top up the reservoir and refit the cap
Take if for a drive and repeat if necessary.

If you are doing this on a GranTurismo MC Shift then the process is the same but you need to use Shell Spirax SF ATF HDX