Grandsport replica alloy pedals FS

maverick

maverick

Member
Messages
1,982
Still for sale

Three sets of the grandsport replicas have sold but I have ONE set left at the moment .

Also have 4 sets of manual ones

and 3 footrests

Cheers Mav
 
CatmanV2

CatmanV2

Member
Messages
48,846
Mav, they looks super, mate. Doubt I'll get a chance to fit them this weekend. Would be great if I can get them on before Brunty, but it seems unlikely.

Make the kitchen counter look *very* smart though :)

C
 
maverick

maverick

Member
Messages
1,982
Glad you like them mate , don't forget to take a pic of them fitted when ya can cheers .
 
maverick

maverick

Member
Messages
1,982
How are you finding them esp the foot rest as this was a bit of a guess as to the size , I hope your pleased with them ?
 
CatmanV2

CatmanV2

Member
Messages
48,846
maverick said:
How are you finding them esp the foot rest as this was a bit of a guess as to the size , I hope your pleased with them ?
Click to expand...

Very pleased, not driven it yet :)

Happy to sit and look. The quality is spot on. Need to be a bit careful getting everything square and so on.

The foot rest is affixed with 3M VHB. I don't think it's critical should it come adrift, but with my experience of that stuff, it's not likely :)

No idea what the throttle pedal is made out of, but it was bloody hard. Did a couple of drills on it.

C
 
StuartW

StuartW

Member
Messages
9,320
They look great

So it's the 3M double sided thick tape you are using for the foot rest or the pads?
 
StuartW

StuartW

Member
Messages
9,320
CatmanV2 said:
Foot rest. Pads are drilled, set screwed and nyloc nutted. Set screws and nut supplied :)

C
Click to expand...

Sorry, I meant is it just a few pads you are using for the foot rest or full length strips of tape? Just curious to know if it will hold it ok, although I realise it's early days
 
CatmanV2

CatmanV2

Member
Messages
48,846
LincsOSCA said:
Sorry, I meant is it just a few pads you are using for the foot rest or full length strips of tape? Just curious to know if it will hold it ok, although I realise it's early days
Click to expand...

I have a big sheet (well biggish about 30cm square) which I bought for (I think) number plate attachment.

So there are two large strips cover most of the area of the original foot rest. If it doesn't hold, I won't be *hugely* surprised, as the original rest is ridged. However, this is quite thick, so I reckon there's enough padding to make the adhesion to the entirety of the ridge.

C
 
StuartW

StuartW

Member
Messages
9,320
Sounds good and you're only resting your foot after all, not depressing a pedal, so it should be fine
 
VMSRTI

VMSRTI

Member
Messages
1,704
CatmanV2 said:
Very pleased, not driven it yet :)

Happy to sit and look. The quality is spot on. Need to be a bit careful getting everything square and so on.

The foot rest is affixed with 3M VHB. I don't think it's critical should it come adrift, but with my experience of that stuff, it's not likely :)

No idea what the throttle pedal is made out of, but it was bloody hard. Did a couple of drills on it.

C
Click to expand...

Interested to see how well the #M stuff holds for this application. It is an excellent product so hopefully will stay put.
 
CatmanV2

CatmanV2

Member
Messages
48,846
VMSRTI said:
Interested to see how well the #M stuff holds for this application. It is an excellent product so hopefully will stay put.
Click to expand...

I shall report back. Looking forward to the drive to the station even more this morning :)

C
 
You must log in or register to reply here.