BL330
Member
- Messages
- 1,123
Finally fitted my set from Maverick in preparation for next weekend's concours.
Sorry you'll have to look sideways on this photo.
The process did involve re-aligning the holes in the brake pedal and top one of the accelerator, as the holes were spaced for 4200 which is slightly different than GS.
Nevertheless great result.
I re-used 2 allen bolts from the accelerator to mount the footrest. You'll find there are 6 plugs locating the rubber, just lever them out.
I drilled out the lower left and created a new hole in the middle so the allen bolts could screw in firmly. I think it was a 5/16" drill bit.
I also re-painted the black surface before attaching the pedals as you never know how fussy these concours judges will be.
Sorry you'll have to look sideways on this photo.
The process did involve re-aligning the holes in the brake pedal and top one of the accelerator, as the holes were spaced for 4200 which is slightly different than GS.
Nevertheless great result.
I re-used 2 allen bolts from the accelerator to mount the footrest. You'll find there are 6 plugs locating the rubber, just lever them out.
I drilled out the lower left and created a new hole in the middle so the allen bolts could screw in firmly. I think it was a 5/16" drill bit.
I also re-painted the black surface before attaching the pedals as you never know how fussy these concours judges will be.