Alternative parts, what everyone needs to know...

Parisien

Parisien

Moderator
Messages
34,927
I don't think these guys ahve been mentioned before......doing discs for 3200s, assuming exactly same as 4200s.....any knowledge or comments.......shame about the price though!

http://www.needforspeed.co.uk/pages/sbv_pl.asp?Vehicle=MS_GT02&PartType=BRT03

These are interesting alternatives.....................

http://www.needforspeed.co.uk/pages/sbv_pl.asp?Vehicle=MS_GT02&PartType=BRT04

And finally this set.................all TUV approved.

http://www.needforspeed.co.uk/pages/sbv_pl.asp?Vehicle=MS_GT02&PartType=BRT02



P
 
Emtee

Emtee

New Member
Messages
8,446
Eurospares show same part numbers (certainly for the years I checked anyway - 3200GT to MY04 4200) but wouldn't you know it, different prices!
 
Emtee

Emtee

New Member
Messages
8,446
Hi P, 4200 rears are £195.06 wheras 3200 rears are £178.82. I assume they're OEM as supplied by Brembo. Regards, Miles.
 
Emtee

Emtee

New Member
Messages
8,446
P, just edited the post as the price is the same as OEM as shown on Eurospares. I'd got it in to my head that OEM was £350.00, but that's with the VAT. (Doh)

Yes, clutch, bell-house, spigot and release bearings. Flywheel was okay.
 
Easyplan66

Easyplan66

New Member
Messages
3,358
I will listen out for you on Monday Moles, as I will probably hear your from Warwick with those larini
 
Parisien

Parisien

Moderator
Messages
34,927
I know...was in both Conaeros and Loz's in France at Le Mans.........the locals thought the Stukas had arrived again!!!!

;)


P
 
Parisien

Parisien

Moderator
Messages
34,927
Sorry guys....didn't quite realise this was the sticky thread for alternative parts......maybe get Conaero so scrub our last few posts...to keep it on thread?


P
 
Parisien

Parisien

Moderator
Messages
34,927
Also, as winter is here....checking wiper prices and find out they are £23 each.....!!!.........anyone got a Bosch alternative or?


P
 
Parisien

Parisien

Moderator
Messages
34,927
Emtee said:
Thought you might like to know that Hill Engineering have a clutch release bearing set fitted with OEM seals for the 4200 CC. No cheaper than the OEM but reportedly much better engineered. It's what's now in mine!

http://www.hillengineering.co.uk/catalog/crb360f1s-p-76.html?osCsid=d5e9b78918155aa61fea4b4ac502605b
Click to expand...

I see that part is £80 plus dearer in the USA.....:)...plus they write up about the crAAp design of the original part .........;)...am assuming their blurb is true...:)

P
 
You must log in or register to reply here.